 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 3 GHz SILICON MMIC WIDE-BAND AMPLIFIER FEATURES 20 UPC2708T UPC2711T GAIN vs. FREQUENCY * WIDE FREQUENCY RESPONSE: 3 GHz * HIGH GAIN: 15 dB (UPC2708T) 15 UPC2708 * SATURATED OUTPUT POWER: +10 dBm (UPC2708T) * INTERNAL CURRENT REGULATION MINIMIZES GAIN CHANGE OVER TEMPERATURE * 5 V SINGLE SUPPLY VOLTAGE * SUPER SMALL PACKAGE * TAPE AND REEL PACKAGING OPTION AVAILABLE 0 0 0.5 1.0 1.5 2.0 2.5 3.0 Gain, GS (dB) UPC2711 10 5 Frequency, f (GHz) DESCRIPTION The UPC2708T and UPC2711T are Silicon Monolithic integrated circuits manufactured using the NESAT III process. These devices are suitable as buffer amplifiers for wide-band applications. They are designed for low cost gain stages in cellular radios, GPS receivers, DBS tuners, PCN, and test/ measurement equipment. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. ELECTRICAL CHARACTERISTICS (TA = 25 C, f = 1 GHz, VCC = 5 V) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS fU GS PSAT P1dB NF RLIN RLOUT ISOL GT RTH PARAMETERS AND CONDITIONS Circuit Current (no signal) Small Signal Gain Upper Limit Operating Frequency (The gain at fU is 3 dB down from the gain at 0.1 GHz) Gain Flatness, f = 0.1 - 2.6 GHz f = 0.1 - 2.5 GHz Saturated Output Power Output Power at 1 dB Compression Point Noise Figure Input Return Loss Output Return Loss Isolation Gain-Temperature Coefficient Thermal Resistance (Junction to Ambient) UNITS mA dB GHz dB dBm dBm dB dB dB dB dB/C C/W 8 16 18 7.5 MIN 20 13 2.7 UPC2708T T06 TYP 26 15 2.9 0.8 10 7.5 6.5 11 20 23 +0.002 200 8 20 9 25 -2 MAX 33 18.5 MIN 9 11 2.7 UPC2711T T06 TYP 12 13 2.9 0.8 1 -4 5 25 12 30 -0.002 200 6.5 MAX 15 16.5 California Eastern Laboratories UPC2708T, UPC2711T ABSOLUTE MAXIMUM RATINGS1 (TA = 25C) SYMBOLS VCC PIN PT TOP TSTG PARAMETERS Supply Voltage Input Power Power Dissipation 2 UNITS V dBm mW C C RATINGS 6 +10 280 -40 to +85 -55 to +150 RECOMMENDED OPERATING CONDITIONS SYMBOL VCC PARAMETER Supply Voltage UNITS V MIN 4.5 TYP MAX 5.0 5.5 Operating Temperature Storage Temperature TEST CIRCUIT VCC 1000 pF Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on 50 x 50 x 1.6 mm epoxy glass PWB (TA = +85C). 50 IN 1000 pF C1 1 C3 1000 nH 6 L* C2 50 OUT 1000 pF 4 2, 3, 5 * UPC2708T only TYPICAL PERFORMANCE CURVES (TA = 25C) CIRCUIT CURRENT vs. VOLTAGE 40 40 VCC = 5.0 V 35 CIRCUIT CURRENT vs. TEMPERATURE Circuit Current, ICC (mA) Circuit Current, ICC (mA) 30 30 UPC2708T 25 20 15 10 UPC2711T 5 UPC2708T 20 10 UPC2711T 0 0 1 2 3 4 5 6 0 -60 -40 -20 0 20 40 60 80 100 Supply Voltage, VCC (V) UPC2708T GAIN AND NOISE FIGURE vs. FREQUENCY AND VOLTAGE 20 9 VCC = 5.0 V Gp VCC = 5.5 V 20 Operating Temperature, TOP (C) UPC2711T GAIN AND NOISE FIGURE vs. FREQUENCY AND VOLTAGE VCC = 5.0 V VCC = 5.5 V Noise Figure, NF (dB) 15 Gp 10 8 8 Gain, GS (dB) Gain, GS (dB) 15 VCC = 4.5 V 5.5 V 10 4.5 V 5 5 0.1 0.3 1.0 3.0 VCC = 5.0 V 7 VCC = 4.5 V 7 5 VCC = 5.5 V 6 NF 6 0 VCC = 4.5 V -5 0.1 0.3 NF 5 VCC = 5.0 V 4 1.0 3.0 Frequency, f (GHz) Frequency, f (GHz) Noise Figure, NF (dB) UPC2708T, UPC2711T TYPICAL PERFORMANCE CURVES (TA = 25C) UPC2708T INPUT RETURN LOSS, OUTPUT RETURN LOSS vs. FREQUENCY 0 VCC = 5.0 V 0 VCC = 5.0 V UPC2711T INPUT RETURN LOSS, OUTPUT RETURN LOSS vs. FREQUENCY Input Return Loss (dB) Output Return Loss (dB) -10 RLin Input Return Loss (dB) Output Return Loss (dB) -10 RLout -20 -20 RLout RLin -30 -30 -40 0.1 0.3 1.0 3.0 -40 0.1 0.3 1.0 3.0 Frequency, f (GHz) Frequency, f (GHz) UPC2708T ISOLATION vs. FREQUENCY 0 VCC = 5.0 V UPC2711T ISOLATION vs. FREQUENCY 0 VCC = 5.0 V -10 -10 Isolation, ISOL (dB) Isolation, ISOL (dB) -20 -20 -30 -30 -40 -40 -50 0.1 0.3 1.0 3.0 -50 0.1 0.3 1.0 3.0 Frequency, f (GHz) Frequency, f (GHz) UPC2708T POWER vs. FREQUENCY 25 VCC = 5.0 V 20 X UPC2711T POWER vs. FREQUENCY 15 VCC = 5.0 V 10 X Power (dBm) Power (dBm) 15 X 10 P1dB 5 X 5 X PSAT X PSAT 0 -5 P1dB 0 -10 -5 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 -15 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Frequency, f (GHz) X: Typical SSB Third Order intercept Point Frequency, f (GHz) X: Typical SSB Third Order intercept Point UPC2708T, UPC2711T TYPICAL PERFORMANCE CURVES (TA = 25C) UPC2708T OUTPUT POWER vs. INPUT POWER AND TEMPERATURE 15 f = 1.0 GHZ VCC = 5.0 V 85 C 10 UPC2711T OUTPUT POWER vs. INPUT POWER AND TEMPERATURE 5 VCC = 5.0 V f = 1.0 GHZ 85 C Output Power, Pout (dBm) Output Power, Pout (dBm) 0 TA = 25 C -40 C -5 -20 C 5 -40 C 0 TA = -25 C -5 -10 -10 -15 -20 -30 -25 -20 -15 -10 -5 0 5 -15 -20 -35 -30 -25 -20 -15 -10 -5 0 5 Input Power, PIN (dBm) Input Power, PIN (dBm) UPC2708T OUTPUT POWER vs. INPUT POWER AND VOLTAGE 15 f = 1.0 GHZ 5.5 V 10 UPC2711T OUTPUT POWER vs. INPUT POWER AND VOLTAGE 5 5.5 V f = 1.0 GHZ Output Power, POUT (dBm) Output Power, POUT (dBm) 0 VCC = 5.0 V 4.5 V -5 5 4.5 V 0 VCC = 5.0 V -5 -10 -10 -15 -20 -30 -25 -20 -15 -10 -5 0 5 -15 -20 -35 -30 -25 -20 -15 -10 -5 0 5 Input Power, PIN (dBm) Input Power, PIN (dBm) NOISE FIGURE vs. FREQUENCY 10 9 Noise Figure, NF (dB) 8 7 UPC2708T 6 UPC2711T 5 4 0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency, f (GHz) UPC2708T, UPC2711T TYPICAL SCATTERING PARAMETERS (TA = 25C) UPC2708T VCC = 5 V, ICC = 26 mA FREQUENCY GHz 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 MAG 0.040 0.063 0.087 0.112 0.132 0.162 0.187 0.211 0.238 0.265 0.319 0.363 0.404 0.435 0.460 0.456 0.442 0.422 0.396 0.365 S11 ANG -3.6 30.7 41.8 47.5 49.4 49.6 47.7 45.7 44.4 40.0 32.0 23.8 15.3 6.9 -3.4 -12.6 -19.9 -26.5 -31.5 -35.3 MAG 5.1 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.1 5.0 4.7 4.5 4.1 3.7 3.3 2.9 S21 ANG -3.2 -11.6 -18.5 -25.4 -32.3 -38.4 -45.3 -52.3 -59.3 -64.4 -79.1 -94.2 -109.5 -125.6 -141.1 -156.6 -172.5 172.7 158.9 146.5 MAG 0.073 0.072 0.071 0.070 0.069 0.068 0.067 0.066 0.065 0.064 0.063 0.061 0.060 0.060 0.060 0.060 0.060 0.060 0.059 0.059 S12 ANG 0.2 -1.3 -3.0 -4.2 -5.6 -5.9 -6.2 -6.6 -6.6 -5.3 -5.3 -5.5 -4.9 -3.7 -0.4 -0.4 -1.8 0.2 0.1 2.0 MAG 0.132 0.138 0.139 0.140 0.142 0.144 0.147 0.150 0.153 0.157 0.165 0.171 0.176 0.168 0.156 0.141 0.123 0.100 0.077 0.051 S22 ANG -11.5 -12.1 -13.1 -17.1 -19.8 -21.3 -23.6 -26.1 -28.5 -31.0 -36.1 -43.7 -50.2 -57.3 -62.5 -60.3 -61.6 -61.5 -61.6 -56.7 1.49 1.49 1.50 1.51 1.51 1.52 1.52 1.52 1.52 1.52 1.48 1.48 1.45 1.46 1.49 1.58 1.74 1.95 2.26 2.62 K1 S21 (dB) 14.2 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.4 14.4 14.4 14.3 14.2 13.9 13.4 13.0 12.3 11.4 10.4 9.3 UPC2711T VCC = 5 V, ICC = 12 mA FREQUENCY GHz 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 3.20 3.40 MAG 0.115 0.110 0.104 0.096 0.085 0.080 0.071 0.056 0.044 0.030 0.028 0.060 0.103 0.150 0.201 0.244 0.284 0.318 0.347 0.369 0.386 0.397 S11 ANG -13.9 -22.1 -31.2 -41.7 -52.0 -58.8 -74.8 -88.7 -103.9 -125.2 149.4 96.8 72.8 53.6 38.3 26.8 17.2 8.4 1.8 -3.9 -8.4 -11.9 MAG 4.1 4.1 4.1 4.2 4.2 4.2 4.2 4.3 4.3 4.4 4.5 4.6 4.6 4.5 4.5 4.3 4.1 3.8 3.5 3.3 3.1 2.8 S21 ANG -5.3 -12.1 -18.3 -24.0 -29.9 -35.6 -41.3 -47.6 -54.2 -61.0 -74.4 -89.4 -104.8 -121.3 -136.9 -152.6 -167.4 178.2 165.2 152.4 140.5 129.0 MAG 0.036 0.035 0.034 0.033 0.032 0.031 0.030 0.029 0.028 0.027 0.024 0.022 0.020 0.019 0.020 0.021 0.026 0.031 0.034 0.039 0.043 0.048 S12 ANG -1.3 -2.0 -4.8 -5.1 -7.5 -8.9 -10.6 -10.7 -11.4 -13.2 -11.0 -9.9 -5.6 7.0 20.8 28.7 29.9 33.7 31.7 29.9 27.3 24.7 MAG 0.098 0.103 0.106 0.116 0.126 0.142 0.150 0.160 0.173 0.187 0.211 0.233 0.250 0.259 0.264 0.261 0.244 0.222 0.198 0.175 0.163 0.162 S22 ANG -2.1 2.7 4.8 5.6 6.6 4.1 2.2 0.5 -2.6 -5.3 -13.4 -21.3 -30.2 -38.4 -46.0 -53.5 -59.5 -62.9 -62.8 -58.8 -49.0 -37.3 3.34 3.44 3.54 3.63 3.70 3.82 3.87 3.94 4.03 4.13 4.47 4.75 5.11 5.38 5.08 4.94 4.16 3.70 3.58 3.35 3.25 3.14 K1 S21 (dB) 12.3 12.3 12.3 12.4 12.4 12.4 12.6 12.7 12.8 12.8 13.1 13.2 13.2 13.1 13.0 12.6 12.2 11.6 11.0 10.4 9.7 9.1 Note: 1. K factor calculations: 2 2 2 K = 1 + | | - |S11| - |S22| , = S11 S22 - S21 S12 2 |S12 S21| UPC2708T, UPC2711T EQUIVALENT CIRCUIT UPC2708T UPC2711T OUTLINE DIMENSIONS (Units in mm) LEAD CONNECTIONS (Top View) (Bottom View) UPC2708T/UPC2711T PACKAGE OUTLINE T06 +0.2 2.8 -0.3 C1D +0.2 1.5 -0.1 3 4 4 3 2 2.90.2 3 0.95 4 5 5 2 1 1.90.2 2 0.95 5 6 6 1 1 6 -0.05 0.3 +0.10 1. INPUT 2. GND 3. GND 4. OUTPUT 5. GND 6. VCC Note: Package Markings: C1D - UPC2708T C1G - UPC2711T +0.2 1.1 -0.1 0.8 0 to 0.1 0.130.1 RECOMMENDED P.C.B. LAYOUT (Units in mm) 3.10 Note: All dimensions are typical unless otherwise specified. ORDERING INFORMATION PART NUMBER UPC2708T-E3 UPC2711T-E3 QTY 3K/Reel 3K/Reel 3 4 0.95 2 5 1 6 0.5 MIN *Embossed Tape, 8 mm wide. 1.0 MIN 1.0 MIN EXCLUSIVE AGENT FOR NEC Corporation RF & MICROWAVE SEMICONDUCTOR PRODUCTS - U.S. & CANADA CALIFORNIA EASTERN LABORATORIES, INC * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393/FAX (408) 988-0279 DATA SUBJECT TO CHANGE WITHOUT NOTICE |
Price & Availability of UPC2708T-E3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |